Three-phase solid-state voltage regulator, high-power thyristor electronic thermostat, electric furnace, kiln regulator, adjusta

Three-phase solid state regulator
Brand
NQQK

Three-phase solid-state voltage regulator, high-power thyristor electronic thermostat, electric furnace, kiln regulator, adjusta

Product Description

Main Function:

The thyristor electronic voltage regulator is mainly used for resistive loads (Incandescent lamps, etc.), single-phase AC brushless motor, adjustable pressure range from 20V-220V, more suitable for low voltage drive heating wire Factory use: such as cutting styrofoam, pearl cotton, raincoats make it to adjust the voltage, reduce power and so on. With the new bi-directional high-power thyristor, the current is up to 40 amps, which solves the over-current problem caused by the electric resistance of the electric furnace wire when cooling is too small; it can easily adjust the output voltage of the mains at 10V- Continuously adjustable between 220V, zero delay, zero hysteresis. Use case: Heat regulation of electric stove and water heater, dimming of lamps and lanterns, small motor speed adjustment, electric iron thermostat and so on, so as to achieve the effer of temperature adjustment, dimming, speed regulation, and pressure regulation.

 

Precautions:

1. Please use within the rated power and voltage range, only suitable for AC grid.

2. It is a normal phenomenon that there is slight heat during work. Please use it in a dry and ventilated place. 3. Input AC 220V power, turn on the power switch, slowly adjust the voltage knob to change the voltage.

4. The machine does not adapt to the capacitor motor, adapt to the brush motor speed and electric wire resistance conductor.

5. The machine does not adapt to work on soft start or slow start voltage regulator.

6. Attention must first load and then adjust the voltage

 

Mapplication:

Electric furnace, water heater, the lamps and laterns that move light, small motor, solder iron temperature control and so on (Inductive or capacity load power should be reduced, the voltage regulator is equipped with two-way high-power thyrister, don't add any component can use , very convenient and practical.)

 

_20180612095244.png_201806120952441.png2 SCR-60A-15KVA.JPG

1 SCR-60A-15KVA.JPG3 SCR-60A-15KVA.JPG4 SCR-60A-15KVA.JPG5 SCR-60A-15KVA.JPG6 SCR-60A-15KVA.JPG

product name Three-phase solid state regulator
Product number SSR-80A-20KVA
Input voltage AC380V
The output voltage AC0-380V adjustable (must be under load condition)
Maximum power 20KW (full power)
High pressure range 0-380V stepless adjustable
Rated current 80A
Features There is no isolation between the control terminal and the output terminal. Only the occasions where the manual control of the resistive load is not required are applied, and the sensitive applications such as inductive loads are used with caution.
Executive standard GB14536.1-2008

 

Enhanced pressure regulator module application range: Heating: various heating furnaces, injection molding equipment, thermoplastic molding, textile equipment, infrared heating, power distribution system, drying system, tool control speed: brush motor speed, angle grinder, Marble machine, polishing machine, engraving machine, electric drill, etc., can book a variety of external control signals: 0-5V, 0-10V, 4-20mA multi-signal (reservation) machine small size, light weight, fast response, no mechanical mechanism Features.

TB2EX.jpgq1.jpgq2.jpgsdd.jpg

 

SSR SSR-60A AC380V 60A 15KW 3 Three phase solid state regulator SSR-60A AC380V 60A 15KW 3 Three phase solid state regulator SSR-60A AC380V 60A 15KW 3 Three phase solid state regulator

temperature speed Lumin

Trade Information

Trade Terms FOB ,CIF ,CFR,EXW,DDP
Payment terms T/T,L/C,Western union,Paypal,Escrow,MoneyGram
Payment conditions 30% deposit in advance,70% balance before shipping.
Delivery time 3-7working days after deposit,2-4 working days for inventory
Packing Neutral carton,Wooden case for large size
Shipping By sea,by air and by express delivery

osity Thyristor SCR AC electronic regulator

FAQ

Q:How to order our product ? 

A:1).Please tell us the model and quantity and other request you need. 

   2).We make the PI for you.

   3).After you confirm the PI, we arrange the order for you after receiving your payment.

   4).After the goods finished, we send the goods out to you and tell you the tracking number.

   5).We will track your goods until you receive the goods. 

Q:  What's your warranty ?

A: 1-2 years

Q: What's your contact information:

A: Our address: Liushi town, Zhejiang province, China. 

Q: What's your shipment method?

A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide

customer the most proper shipment method.

Q: What's about MOQ?

A: First order MOQ=1pcs

Q: If i want to release order, what's the payment method you accept ?

A: We accept T/T, Paypal, Western union, L/C,etc.

Q: If i want to release order, what's the process?

A: Thanks. You can send inquiry to us by alibaba, or send us by email, we will reply within 24hrs.

Company Information

NQQK Factory information-750.jpg

nqqk fair.jpg

 

Contact us

nqqk nqqkelc factory.jpg

 

ADD:NO.18 QunYing Road, Xingguang Industrial Zone, liushi, Yueqing City, Zhejiang, China

Tel: +86 577 61787391               Fax:+86 577 61787392

Skype: NQQK ELC

Mobile/WeChat/WhatsApp:+86-139 6878 5810

Web:www.nqqkelc.com               E-mail:sales at nqqkelc.com

 

Thank you & Now send your kindly inquiry below, please!