AC 80 - 260V 0 - 100A power metering monitor digital voltmeter ammeter power meter
AC digital multi-function table manual
Product Type: PZEM-011
1. Electrical parameter measurement function (voltage, current, active power, power).
2. Overload alarm function (more than power alarm threshold, backlight and power flashing tips).
3. Power alarm threshold preset function (can set the power alarm threshold).
4. Power clear function.
5. Power-down data retention function.
6. STN full-angle LCD display (also shows voltage, current, active power / power).
7. Backlight function.
B. Display and press
Large screen STN full-angle LCD screen also shows voltage, current, power / power (power and power display by the button to switch).
two. Display format
1. Power: test range 0 ~ 22kW
1kW within the display format 0.0 ~ 999.9W;
1kW and above display format 1000 ~ 9999W;
10kW and above display format 10.0 ~ 22.0kW.
2. Power: test range 0 ~ 9999kWh
10kWh within the display format 0 ~ 9999Wh;
10kWh above display format 10 ~ 9999kWh.
Overflowed automatically back to 0.
3. Voltage: test range of 80 ~ 260V
Display format 80 ~ 260V
4. Current: Test range 0 ~ 100A
Display format 0.00 ~ 99.99A.
1. Backlight control
The backlight can be turned on or off by pressing the key, and the backlight status is automatically saved.
2. The battery is cleared
Step 1: Press the button for more than 3 seconds until the power display area is flashing, then release the button;
Step 2: If you press the key again, the battery will clear the data and exit the clear state;
If the key is pressed again, the charge data is not cleared and the cleared status is cleared;
If there is no key action within 10 seconds, the power data is not cleared and the cleared status is cleared.
3. Power alarm value setting
Step 1: Press the button for more than 3 seconds until the power display area is flashing, then release the key;
Step 2: The power display area displays the current power alarm value and the lowest digit starts to blink, the short key is +1 for the digit, and the short press key switches the digit to be set. The alarm value can not exceed 25kW (factory default 25kW).
Step 3: After setting the long press key for more than 3 seconds or without any key action for more than 10 seconds, the data will be saved automatically and the setting status will be exited.
4. Power / power switch
Through the short press to switch to display the current power / cumulative power consumption, display state power-down automatically saved.
1. This module is suitable for indoor use and can not be used outdoors.
2. The load can not exceed the rated power.
3. Wiring sequence can not be wrong.
1. Working voltage: 80 ~ 260VAC
2. Test voltage: 80 ~ 260VAC
2. Rated power: 22kW
3. Operating frequency: 45-65Hz
4. Measurement accuracy: 1.0 level
E. wiring diagram
AC 80 - 260V 0 - 100A power metering monitor digital voltmeter ammeter power meter AC 80 - 260V 0 - 100A power metering monitor digital voltmeter ammeter power meter AC 80 - 260V 0 - 100A power metering monitor digital voltmeter ammeter power meter AC 80 - 260V 0 - 100A power metering monitor digital voltmeter ammeter power meter
|Trade Terms||FOB ,CIF ,CFR,EXW,DDP|
|Payment terms||T/T,L/C,Western union,Paypal,Escrow,MoneyGram|
|Payment conditions||30% deposit in advance,70% balance before shipping.|
|Delivery time||3-7working days after deposit,2-4 working days for inventory|
|Packing||Neutral carton,Wooden case for large size|
|Shipping||By sea,by air and by express delivery|
Q:How to order our product ?
A:1).Please tell us the model and quantity and other request you need.
2).We make the PI for you.
3).After you confirm the PI, we arrange the order for you after receiving your payment.
4).After the goods finished, we send the goods out to you and tell you the tracking number.
5).We will track your goods until you receive the goods.
Q: What's your warranty ?
A: 1-2 years
Q: What's your contact information:
A: Our address: Liushi town, Zhejiang province, China.
Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide
customer the most proper shipment method.
Q: What's about MOQ?
A: First order MOQ=1pcs
Q: If i want to release order, what's the payment method you accept ?
A: We accept T/T, Paypal, Western union, L/C,etc.
Q: If i want to release order, what's the process?
A: Thanks. You can send inquiry to us by alibaba, or send us by email, we will reply within 24hrs.
ADD:NO.18 QunYing Road, Xingguang Industrial Zone, liushi, Yueqing City, Zhejiang, China
Tel: +86 577 61787391 Fax:+86 577 61787392
Skype: NQQK ELC
Mobile/WeChat/WhatsApp:+86-139 6878 5810
Thank you & Now send your kindly inquiry below, please!